Cooper Menvier SD3 Betreibershandbuch Seite 24
- Seite / 56
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
24
Note: this message will not require an acknowledgement.
Report Time:
This option sets the time that the Auto Reporting Message is transmitted
(Default 12:00 hours).
Scroll with ¬and ¦ keys to select the required hour.
SMS Call Number:
This option allows the editing of the default SMS service centre used by
SD2 to send a text message.
The SD2 defaults to the O2 SMS centre. Listed below are other service
centres that can be used:
Service Provider Telephone No. Protocol
O2 - UK +44 (0) 7860 980480 8,N, 1
One2One- UK +44 (0) 7958 879889 7,E, 1
Vodafone Mobiles - UK +44 (0) 7785 499993 8,N, 1
If your SD2 is connected to a private telephone system, remember that
you may have to include an extra digit (for example ‘9’) to gain access to
the public telephone network.
If you are calling a SMS service centre in a different country you need to
make sure that the contact’s mobile telephone number has the
international country code, e.g., if the contact’s UK mobile number is
07801 123 456 it needs to be entered as 447801 123 456.
SMS Format:
The SD2 can be configured to communicate with the SMS service centre
either using 7 data bits, even parity and 1 stop bit. Or, using 8 data bits,
no parity, and 1 stop. See SMS Call Number for further details. When going
via a switchboard system, remember to insert the number used to get an
external line.
The protocol used by each service centre may vary from one provider to
another. Please make sure that the SD2 protocol is configured correctly;
see SMS Parity option.
One Ring Answer:
If enabled (ON) the SD2 will use the answer defeat feature, which operates
as follows: To obtain remote access the caller must dial the unit and wait
for the line to ring several times (but not more than the number of rings
programmed for the Ring Count, see next option). The caller must then
hang up the call and redial the unit within 60 seconds. The SD2 will then
- Overview 3
- Main Features 4
- Listen-In Mode: 6
- Talkback Mode: 6
- Message: 6
- Remote Access: 6
- SD2 Layout 7
- Installation Requirements 8
- PCB Layout 8
- +12V & 0V 9
- Trigger 1 - 4 9
- OP1 & OP2 10
- Standard BT telephone plug 12
- Commissioning 13
- Simple Programming 14
- Programming Menu Options 15
- Contact Details 16
- Messages 19
- To Customise Text Messages 21
- To Add/Change Text Messages 21
- System Options 23
- Report Time: 24
- SMS Call Number: 24
- SMS Format: 24
- One Ring Answer: 24
- Access Codes 26
- To Change Remote Access Code 27
- Anyone (default) 29
- No One 29
- Edit Call Clear by Options 29
- Output Options 30
- To Program Outputs 1 and 2: 32
- Call Routing Options 33
- Edit Restore Routing: 34
- Route Auto report 35
- Set Date and Time 36
- View Log 37
- Test Options 39
- Test Outputs 41
- Test Triggers 42
- Test Supply 43
- Leaving Programming 44
- User Guide 45
- To Record A Memo Message 46
- To Playback a Memo Message: 46
- Dial in for Remote Access 48
- The Remote Access Menu 49
- Record/Play Voice Messages 51
- Text Editing Keys 52
- Specifications 53
- Quick Reference 54
Verwandte Produkte und Handbücher für Türsprechanlagen Cooper Menvier SD3
(28 Seiten)
(18 Seiten)Waeco Glacières manuels d'utilisation
À partir de C
Kommentare zu diesen Handbüchern