Cooper Menvier TS690ID Bedienungsanleitung PDF herunterladen (Seite 34)

WEBWAYONE LTD, Unit 11 Kingfisher Court

Hambridge Road, Newbury, Berkshire. RG14 5SJ

00 44 1635 231 514 support@webwayone.co.uk

Castle CareTech alarm panels

EuroONE

EuroONE Plus

Serial interface connection

Connect the RS232; R &T terminals and RTN on the WebWay to the MSX-5 Expansion Card that should be located in

the Expansion Card slot on the Euro-ONE and Euro-ONE Plus panel. The connector is not labeled, however the

connections are from right to left PIN 1 Black, PIN 2 White, PIN 3 Red. WebWay connections are PIN T White, PIN R

Red and RTN Black.

Connect the WebWay PWR + and - to any relevant Power and Ground terminals.

EuroONE alarm panel configuration - serial mode

Go to Engineering Mode

Go to programme Digi/SMS calls

Select Disable Digi/SMS <0>

Select ARC Details <1>

Select Active <Yes>

Select format <WebWayOne IP> (Option 141)

Select SIA Ack Char <006>

Select SIA Nack Char <021>

Select valid areas <select areas to be reported>

Select stop on success <yes>

Select ARC account <No>

Select content 1-16 <Trigger events> (recommend 1-5, and 7-13)

Select content 17-32 <Trigger events> (recommend 21-25, 27-30, and 32)

Select redials <03>

Select time out <15>

Select test calls <No>

Note: The recommended Content settings will send the most relevant event reports. Some installations may require less

event types to be activated. Refer to the Castle documentation for more information.

Go to ‘set up downloading’

Select download by <IP>

Select poll timeout <10>

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Cooper Menvier TS690ID Bedienungsanleitung Seite 34