Cooper Menvier SD3 Spezifikationen PDF herunterladen (Seite 10)

Installation SD1+

When using the bell output to trigger the SD1+, you may find that the

external sounder is partially triggered. If this is the case you will need to fit a

1k resistor between the SD1+ trigger input and 12V.

BT. CONNECTIONS

1. Connect telephone line using one of the methods shown below:

2. Replace the plastic cover over the telephone line connections.

SD1+ Programming

Option 8: Abort Options

Occasionally you may trigger the SD1+ by accident and

cause it to send an unwanted call. Option 8 allows you

to select one of three methods of cancelling a call:

“INPUT” applying a signal to the Abort input.

“RESTORE” removing the trigger signal.

“PASSCODE” entering the passcode.

You can also prevent anyone cancelling a call by

selecting “NONE”.

1. If necessary initialise the SD1+ .

SD1+

2. Key in the current passcode.

READY

3. Press 8, the display shows:

ABORT-

4. Press [.

The display shows the current method used to

cancel a call, for example:

INPUT

5. Press B repeatedly until the display shows the

method that you want to use, for example:

PASSCODE

6. Press [ to store the change and return to “READY”.

READY

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Cooper Menvier SD3 Spezifikationen Seite 10